Siemens S5

Product Overview

The Siemens S5 driver works in conjunction with KEPServerEX to exchange data between OPC clients and Siemens S5 PLCs using the AS511 protocol, which allows a direct connection to the programming port of the PLC. The programming port utilizes a Current Loop connection, requiring the use of either the supplied programming cable or an external RS-232 to Current Loop converter. For more information on wiring and recommendations for Current Loop converters, refer to the product manual. KEPServerEX automatically optimizes data acquisition based on client demand and ensures data integrity through extensive error handling.

Features

• Supports direct Peer-to-Peer Current Loop connections from the PC serial port
• Supports Ethernet Encapsulation, though the protocol's tight timing requirements may preclude the driver from working in all Ethernet network environments
• Supports multiple PLC connections when using Ethernet Encapsulation
• Supports the following Memory Types: I, Q, F, T, C, and Data Block Access by named type
• Supports all data types
• Modem Support
• Automatic dial configuration
• Multiple phone number management
• Communication Serialization

A driver is a software component that enables KEPServerEX to meet the communication requirements of a specific device, system, or other data source. The driver handles all proprietary communications between the data source and KEPServerEX; KEPServerEX handles all OPC or proprietary client communications between the driver and the client application(s).

Drivers may be licensed individually or in suites. Additional drivers can be licensed on demand as connectivity needs evolve. All OPC client interfaces can connect to KEPServerEX without additional charge.